Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
Free Delivery Over £40
Meet The Experts
98% Stock Availability*
Education Rewards Club
Creative CornerSlab Roller
£559.00
£670.80
Web Code
PM420A
QTY:
15 in stock
Slab Roller - 910 x 1010 x 1210mm (H x W x L)
Slab Roller.
This heavy-duty machine is constructed from steel legs and a heavy-duty Formica table top plate bed.
To operate the slab roller, turn both the adjustable knobs on top of the frame together, a little at a time, to lower the roller and create pressure on the block of clay. Then, rotate the large flywheel or turn handle on the side of the machine. The Slab Roller is supplied with two canvas blankets which are used to sandwich your block of clay.
We advise that you stretch the width of your block of clay so that when it is rolled you get width as well as length. You can also cut your clay block into slices and lay the long edge of each slice together and the rolling action will join them into a flat piece. This will speed up working times for any busy ceramics or 3D modelling department.
Rolls slabs up to 760mm wide and a maximum depth of 2.5 inches.
Supplied in four boxes and requires assembly.
Instructions supplied and can be viewed here.
This heavy-duty machine is constructed from steel legs and a heavy-duty Formica table top plate bed.
To operate the slab roller, turn both the adjustable knobs on top of the frame together, a little at a time, to lower the roller and create pressure on the block of clay. Then, rotate the large flywheel or turn handle on the side of the machine. The Slab Roller is supplied with two canvas blankets which are used to sandwich your block of clay.
We advise that you stretch the width of your block of clay so that when it is rolled you get width as well as length. You can also cut your clay block into slices and lay the long edge of each slice together and the rolling action will join them into a flat piece. This will speed up working times for any busy ceramics or 3D modelling department.
Rolls slabs up to 760mm wide and a maximum depth of 2.5 inches.
Supplied in four boxes and requires assembly.
Instructions supplied and can be viewed here.
| Web Price | £559.00 |
|---|---|
| Web Code | PM420A |
| Alternative Codes | PM420A, 310047, M420A |
| Catalogue Page Number | 365 |
| Pack Size | Each |
| Pack Size | Each |
This product is classified as an 'article' and therefore by law does not require a safety data sheet under current legislation.